Syvecs S7i ECU

Syvecs S7i ECU This is the “entry level” Syvecs ECU. Although relatively basic it features, traction control, drive by wire, and CAN bridge, making it a very powerful tool indeed with 16 x Inputs, 16 x Fuel Outputs, 6 x Ignition TTL Outputs, 1 x Lambda Input, 1 x Knock Input and 1 x EGT Input. All software features are enabled from factory – Does not support Direct Injection Control or Paddle-shift Control! Should you need a plug and pin kit or any upgrades and options, please go here. Any sensors needed can be bought here. Specifications: 100 MHz full duplex ethernet for connection to PC for programming and data download 1 CAN 2.0B interface 16 general purpose analogue inputs: – 4 5V/bipolar, sensor/sync/speed, programmable trigger voltages – 4 5V/Thermistor, sensor/sync/speed, fixed trigger voltages – 4 5V sensor input – 4 Thermistor sensor input 1 NTK/LSU lambda circuit 1 K-type thermocouple circuit 1 knock input 16 low side driver outputs: -8 injection outputs (Max 10 amps) -8 ancillary outputs (Max 5 amps) 6 logic level ignition outputs (5 or 12v) 1MB Battery backed internal logging memory 6 to 26v input voltage range with reverse polarity protection 2 regulated 5V sensor supply outputs with protection Unregulated sensor supply output which tracks the ECU supply voltage 5 Seperately protected sensor and communication ground inputs Dimensions : 181 x 160 x 51.5 mm For info on Syvecs S7i ECU please go here For info on our full range of goods and services please go here