370Z HKS A/T Cooler Kit

370Z HKS A/T Cooler Kit – 27002-AN001 【A/T FLUID COOLER KIT】 Proper Fluid Temperature Management to Enjoy Driving. Rough driving of automatic cars raises the AT fluid temperature. Excessive AT fluid temperature decreases the fluid viscosity which may cause abrasion to the built-in disk and/or brake. HKS A/T Fluid Cooler can reduce the oil temperature while maintaining the automatic transmission performance of tuned vehicles. Vehicle Specific AT Fluid Cooler Kit Features - The kit is installed inside the grill. This kit can be used with HKS Oil Cooler Kit. - AT fluid temperature can be maintained during circuit driving. In-house test result showed the temperature dropped by approximately 10℃ after installing this kit. - Water temperature won’t be affected since the core is located inside the grill. - Black core is less noticeable, but it provides noticeable performance. - Installation does not require complicated procedures. Code No. 27002-AN001 - When temperature of automatic transmission fluid is increased, Z34 will be fail safe. Then, throttle angle will be limited and AT manual operation will not work properly. This product prevents from fail safe during sport driving. (Continuous operation at more than 145℃ for 120 seconds or exceeding 150℃ cause fail safe.) - Temperature of engine oil also increases and engine oil cooler is required for sport driving. This product was developed to be used with HKS Oil Cooler Kit. - W200xH130xT32 9 rows core is located in front of radiator. - Easy installation without any modification. Removal of resin protector is required. ◆Performance ●Test vehicle SPECIFICATION - Muffler LEGAMAX Premium - CATALYZER HKS METAL CATALYZER ●Installation ●Performance At air temperature 10℃, it became fail safe after 7 laps at Fuji Speedway. After installation of AT Cooler, at air temperature 30℃, it enabled 25 minutes continuous driving at the same circuit. ●Installation time About 1.5～2 hours ◆Components AT Fluid cooler core W200 X H130 X T32 9 rows AT Fluid cooler core bracket Hose φ10 · Hose φ8 φ10-φ8 adapter pipe · Hose band #4 Corrugate tube ●Remarks for installation - Since popup engine hood is equipped, before removal of bumper, disconnect the negative terminal of the battery and leave at least 3 minutes before installation work. - Relocation of washer tank is not required even using it with an Oil Cooler Kit. - Use specified A/T fluid only or it may cause serious failures. - Follow the service manual for volume adjustment of A/T fluid. (Adjustment work with a special diagnosis tool CONSULT-III is required.) Vehicle · Model · Engine · Model Year · Core Size・Row · Core Location · Code No. · Price · Remarks FAIRLADY Z · Z34 · VQ37VHR · 08/12- · W200xH130xD32, 9-layer · In front of radiator · 27002-AN001 For more info on Nissan 370Z HKS A/T Cooler Kit please go here For info on our full range of goods and services please go here