HKS Hipermax S Z33

HKS Hipermax S Z33 FAIRLADY Z (Z) Z33 Code No. 80300-AN010 Going beyond just ride comfort or handling performance, a new standard of “Driving Comfort” aims for comfort in ride but also in the peace of mind generated by handling performance and drivability . An uncompromising balance which delivers on all the demands of street driving. ※The above photo is an item for Z34. The model in the photo is Z33. Application Engine · VQ35DE Model Year · 02/08 – 07/01 Remarks · Fairlady Z Roadster is not compatible as it has not been tested. Specification FRONT · REAR Damping force adjustment · 30 steps · 30 steps Base valve · – · – Height adjustable lower bracket · 〇 · 〇 Upper mount · Rubber · Rubber Inverted/Normal type · Normal · Normal Damper/Spring layout · Coilover · Separated Spring rate change at factory · Possible · Impossible Damping force adjustment with wire · – · 〇 Helper spring (Spring rate N/mm) · 〇 (19.8) · – Ride Heightmm Factory *2 · Test data · Adjustable range High – Low *3 · Drivable range High – Low *4 FRONT · Ride height *1 · 683 · ← · 694 ～ 649 · 694 ～ 649 Against stock · -12 · ← · -1 ～ -46 · -1 ～ -46 REAR · Ride height *1 · 684 · ← · 698 ～　649 · 698 ～　649 Against stock · -15 · ← · -1 ～ -50 · -1 ～ -50 *1. Height from road surface to fender arch. *2. Height at factory is the data tested at HKS with the setting of Full Kit. (HKS’ recommended setting.) *3. Adjustable range (However, the lowest value may not be road legal. Even within the adjustable range, car body, arm etc. may contact. In such case, it will be hard to drive. Damper oil leakage or any other problems caused by low ride height setting from the factory setting will void the warranty of the product.) *4. Drivable range that there is no contact of car body or arms etc. (However, change of tire/wheel size may cause a problem.) Caution). Actual data depends on each vehicle. Kit information Spring of Full Kit F · R Spring rate N/mm(kgf/mm) · 98 ( 10.0 ) · 88 ( 9.0 ) Free height (mm) · 220 · – Spring type · Straight Barrel type · Special shape Recommended range to change spring rate N/mm(kgf/mm) · +20 ( 2 ) · – Specification of damper F · R Damping force (Rebound/Damping)N* · 1015 / 432 · 579 / 319 Default position of dial · 15 · 15 Remaining damper stroke (Rebound/Damping)mm · 47 / 52 · 68 / 68 * The value of the damping force is at piston speed of 0.1m/sec. Setting data F · R Default · Test · Drivable limit High * · Drivable limit Low * · Default · Test · Drivable limit High * · Drivable limit Low * Length of case (mm) · 479 · ← · 479 · 479 · 331 · ← · 343 · 319 Spring Set length(mm) · 246 · ← · 239 · 268 · – · – · – · – Length to ride hight adjuster (mm) · 34 · ← · 41 · 12 · 43 · ← · 52 · 21 Lever ratio · 1.54 · 1.59(spg) , 1.18(dmp) * Refer to the above explanation *3 of ride height information for drivable high and low limitations. Test vehicle information F · R Vehicle weight kg · 838　(780) · 685　(670) Tire size (Air pressure) kPa · 235 / 40 – 19 ( 240 ) · 265 / 35 – 19 ( 240 ) Wheel size · 9.0 JJ × 19 inset 35 · 10.0 JJ × 19 inset 35 Alignment (Toe/Camber) · Test data · out 1 mm / -1°06′ · in 2 mm / -1°55′ Standard value · in 1 ± 1 mm / -0°40′ ± 0°45′ · in 1.9 ± 0.8 mm / -1°35′ ± 0°30′ * Test data at HKS. Parts List * It may be changed without prior notice. Point MAX4GT has been reviewed and renewed to make it easier to handle and more versatile. The front rate has been increased by 1K to provide better cornering performance than before. We aim to provide a properly supple driving experience. Both front and rear are equipped with PVS and high flow rate needle, and the synergistic effect of these two elements quickly boosts damping force in the necessary areas and cuts off the unnecessary movements. The damping force is precisely controlled to provide a stable and comfortable ride quality. Even though helper springs have been equipped to the front to provide sufficient stroke on the extension side, as well as a sufficient ride height adjustment range, in order to surpass the previous one which had a slight height adjust amount The rear damping adjustment dial used to be set on the tire side, but this time we have significantly reviewed the components and changed it to an upright type that makes it easier to adjust the damping. By doing some interior cutting, it is easier to adjust the damping adjustment directly via wires making it easier to use in different situations. It is recommended for a wide range of users, from street driving to winding roads and track. ※Test vehicle was tested by replacing the front lower arm with a new stock one. We recommend that you check the condition of the front arm bushings for cracks when installing the product in order to maximize the potential of the vehicle. ※The FAIRLADY Z ROADSTER is not compatible because the installation has not been checked. Thank you for your understanding. For info on HKS Hipermax S Z33 please go here For info on our full range of goods and services please go here