FA20 HKS 2.1L Stroker Kit (High Compression)

FA20 HKS 2.1L Stroker Kit (High Compression) – 21004-AT002 【Capacity Upgrade Kit for FA20】 Capacity Upgrade Kit developed by taking advantage of knowledge and experience acquired through D1 drift and time attack at Tsukuba Circuit. This kit was designed exclusively for the FA20 engine by meticulous analysis and experiment. HKS delivers this kit with “Made in Japan” quality. High-performance specifications withstanding 550(ps)-50(kgf・m)! This kit is for people who want to upgrade all the way including the engine internals. FEATURES POINT-1:PISTON KIT - Carefully selected specially forged raw materials used. - Replacing the gasket enables both NA and turbo-charged engine users to use this kit. - In order to cope with the demands of high outputs, strength analysis and tests have allowed optimization of compression ratio for flexibility of setup and high boost use. - Piston crown had 3D design in consideration of the stock direct injection system. - Stock pistons skirts overhang from the block during the bottom of travel. Short height pistons have revised potential issues in this area. - Friction, weight, and other design properties to suit the needs of short-height pistons. POINT-2:CONNECTING ROD - Specific connecting rods have been designed to suit the longer stroke. With no engine modifications, a special size crankpin has been set requiring new bearings. ※The crank metals (Nissan RB26 & SR) must be purchased separately. - High strength I beam design and revised connecting rod bolt size. POINT-3:CRANKSHAFT STROKE 90.0mm - Made from HKS special forged material - Perfect pin journal size was selected by meticulous analysis and experiment for extended stroke. - Carefully designed weights balance the engine for maximum efficiency. POINT-4:Stock Bore Compatible　86.0mm - In order to maintain the engine block strength, the stock bore size is maintained meaning there is no need for cylinder liners - Reduces the cost of installation as liners, bore & hone, and block facing processes are unnecessary. Stock · HKS 2.1L Piston · Bore dia. mm · 86 · 86 Displacement cc · 1998.2 · 2091.2 Comp. Ratio (measured) · G/K 0.5 mm · 12.1 · 12.4 G/K 0.6 mm · 12 · 12.3 G/K 0.7 mm · 11.9 · 12.1 G/K 1.0 mm · 11.5 · 11.8 Boring/Horing · – · n/n Remarks · Cast D. ignition · Forged D. ignition Con’rod · Big end dia. · 53 · 51 (RB & SR) Bolt size · M9.5 · M8 Remarks · Split I-beam · Split I-beam Crankshaft · Stroke mm · 86 · 90 Main journal dia. · 68 · 68 Pin journal dia. · 50 · 48 Remarks · Forged · Forged PERFORMANCE Test vehicle Vehicle · BRZ(ZC6) Kansai demo car Engine · FA20 Transmission · 6MT Parts · Specification Suction · HKS Premium Suction Exhaust Manifold · Kansai original Front Pipe · Kansai original Exhaust system · HKS Hi-Power Spec L I/J · Stock Fuel Pump · Stock CPU · Kansai original ECU Other · Big throttle 2.1L kit + Camshaft were tested on Kansai Service’s demo car with NA engine. This graph shows before & after installation. Upgrading the capacity exceeds the stock engine power in whole power range. Power increase continues to the high rpm range by using the camshaft together with 2.1L Kit. Test supported by Kansai Service. For info on FA20 HKS 2.1L Stroker Kit (High Compression) please go here For info on our full range of goods and services please go here